CZ type steel mechanical equipment proce

　　CZ type steel mechanical equipment process: the strip is fed from the tail of the equipment, and then pressed into C type steel from the head by various press rollers. In the traditional process, after the C section steel is pressed and formed, it needs to be cut off manually, and then transported to the punching equipment to punch the hole according to the size required by the customer. The production cannot be continuous and the efficiency is not high. After gradually improving the production process, the automatic control of the whole process is finally realized, which greatly improves the production efficiency and increases the technical content and added value of the customer's equipment.

　　The main characteristics of CZ type steel mechanical equipment: the roller adopts bearing steel (GR15), annealing after forging; The base adopts 310H steel; Adopt the next five on four leveling, to ensure leveling; Adopt quadratic form, ensure the square and right Angle of the product, the upper size can be made; The thickness of rolling material is 1.5mm-3mm(thickness can also be designed according to user requirements).